‘How many pallets fit on a truck?’ is one of the most common questions our dispatch team hears. The quick answer is as a rule of thumb, a large 8-wheeler with around a 10-metre deck carries about 16 standard NZ pallets in a single layer, while a smaller 4-wheeler fits roughly 8 to 12. But floor space is only half the story, the weight of what’s on the pallets also plays a key role.
In this blog we cover those two limits – floor space and weight – and how they decide what actually fits on a truck. We run through pallet capacity across our fleet, when a curtain-sider beats a flat deck, whether you can double-stack, and what to tell dispatch to get the right truck the first time.
The two limits: floor space vs weight
Light, but larger freight tends to take up more space and you will run out of deck before you run out of weight. Dense freight on the other hand ‘weighs out,’ that is, you will hit the legal payload with the deck half empty.
What counts as a ‘standard’ pallet
In New Zealand the standard pallet footprint is 1200 x 1200 or 1200 x 1000 mm. At that size, two pallets sit side by side across a standard truck deck. At Tutill, we recommend our clients to specify in the job booking anything that exceeds 1200 x 1200.
Pallet capacity across the Tutill fleet
| Pallet Capacity by Truck Type | ||
|---|---|---|
| Truck Type | Capacity (Standard Pallets) | Key Features/Notes |
| 8-wheeler flat deck | 16 | Single layer (approx. eight rows of two). Our newest 8-wheeler (#168) serves Auckland/upper North Island. |
| 4-wheeler flat deck | 8–12 | Single layer. |
| Curtain-siders (4, 6, and 8-wheelers) | Same as corresponding flat deck | Side/rear access for forklift/pallet; 25+ in fleet, approx. half with tail lifts. |

An image of standard pallets loaded onto a Tutill Carriers trucks
Curtain-sider or flat deck for pallets?
Curtain-siders are usually the easier choice for palletised freight, you can load from the side with a forklift and the curtains keep the weather off your goods. Flat decks come into their own for loads that need crane (Hiab) or top loading, or that are simply too big or awkward for a curtain-sider. And if there’s no forklift at one end of the job, a tail-lift curtain-sider lets a pallet jack do the lifting.
Can you double-stack?
If your goods are stackable and the bottom pallets can safely carry the weight, double-stacking can roughly double the count. If they can’t be stacked, plan on a single layer height.
Why Choose Tutill Carriers
We move a lot of pallets. For a sense of scale: in the first half of 2026 alone, our trucks completed 29,846 deliveries and covered close to 991,846 km, with roughly 21% of jobs that were time-critical.
What to tell our dispatch team?
Providing the below information to our team in advance will help us organise the right truck for you so nothing turns up too big, too small or unable to get in.
- How many pallets
- The footprint and height of each
- The weight (per pallet or total)
- Whether they’re stackable
- The access at both ends, forklift on site, or tail lift needed
Not sure which truck you need? Send our dispatch team your pallet count, sizes, weights and site access details. We’ll match you with the right truck from our fleet of more than 50 vehicles, whether that’s a flat deck, a curtain-sider or a tail-lift truck. Get in touch with Tutill Carriers for a quote today.